Glass edger is a piece of equipment specially used for edge trimming and polishing of glass. In the glass processing industry, glass edge grinding machines play an important role. They can accurately cut and edge the original glass plates to meet the production of glass products with different size and shape requirements.

Glass edging machine is a special equipment used for edging and polishing glass to obtain a smooth and smooth edge. The following are the steps to use the glass edger:

1. Preparation: Make sure the glass plate meets the requirements and has no obvious damage or scratches, and check whether the edge grinder is in normal working condition.

2. Adjust the edging machine: According to the thickness and needs of the glass, adjust the parameters of the edging machine, such as the clamping thickness of the edging machine, the amount of feed of the grinding wheel, etc.

3. Safe operation: Wear safety protective equipment, such as goggles, gloves, etc., to ensure your own safety.

4. Place the glass plate: Place the glass plate to be edged on the workbench of the edger and fix it.

5. Start edging: Start the edging machine, make the grinding wheel contact the glass plate, and start the edging process. Depending on your needs, you can choose grinding wheels of different shapes and thicknesses for grinding.

6. Grinding process: Through the movement of the edge grinder, the grinding wheel will grind the edge of the glass, gradually removing unevenness and burrs. At the same time, water is injected to keep the grinding wheel and glass cool and prevent overheating.

7. Polishing treatment: After completing the grinding, the polishing wheel can be used to further polish the edge of the glass to obtain a smoother and translucent surface.

8. Cleaning and inspection: Turn off the edge grinder, clean up the remaining glass debris and sand, and check whether the edge grinding effect meets the requirements.

It should be noted that special attention should be paid to safety precautions during operation, and dangerous behaviors such as touching the grinding wheel and placing fingers close to rotating parts should be avoided. At the same time, follow the equipment instructions and operating instructions for correct operating procedures.

In short, a glass edger is a special equipment used for edge grinding and polishing of glass. It needs to be adjusted and prepared before use, then operated according to the specified steps, and finally cleaned and inspected. Proper use of a glass edger can provide high-quality glass edge results.